/ / / 846XA-0010
846XA-0010

846XA-0010

SAC03

Analysis card for CFSST and CFSST02 detectors. This allows the connection of one or more shutter motion detectors (max 5). Adjusting the number of pulses via jumpers and potentiometer. Current draw 32 mA. Operating temperature -5° ÷ +50 °C. Dimensions 77 x 57 x 20 mm.

Manuali e Certificazioni
Gearmotor or automation with encoder.
Automation tested in compliance with European standards regarding impact forces.
24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
120 V AC gearmotor for US markets.
230 V AC gearmotor.
230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.
Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.
Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.
Product compatible with CXN BUS 2-wire connection technology.
Product equipped with BRUSHLESS technology.
From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.
From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.
The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.
The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.
The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.
Technical data

MODELS

SAC03

      Related products

      TTS
      TTS

      Transmitter featuring an elegant and refined design

      BKV
      BKV

      Solution for large sliding gates up to 2.500 kg, 36V

      GARD GT4
      GARD GT4

      Automatic barrier for passage width up to 5m

      TOP
      TOP

      Fixed-code or rolling-code transmitters