Gate automations / Control panels / ZL60 / 002ZL60

002ZL60

ZL60

Control panel for one or two-leaf swing gates, dip-switch setting, on-board radio decoding and self-diagnosing safety devices.

Manuals and Certifications

24 V

Gearmotor or automation with encoder.

Automation tested in compliance with European standards regarding impact forces.

24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.

120 V AC gearmotor for US markets.

230 V AC gearmotor.

230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.

From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.

The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

Characteristics

Colored and separate terminal blocks for faster connections and diagnosis.
Dip for setting the functions: closing time, speed and sensitivity.
Self-diagnosing, hardwired safety devices.
Plug-in connectors for the R800 control board and AF receiver.
It can handle up to 25 Rolling Code users.

Functions

Technical data	Value
Ingressi di sicurezza	2
Virtual encoder management	✓
Number of users	25
Accessori BUS CXN	✗
Accessori tradizionali	✓

Technical data

Technical data
Power supply (V – 50/60 Hz)
Power supply to motor (V)
Absorption (A)
Power (W)
Maneuvering time at 90° (s)
Duty/cycle (%)
Cycles/Hour
Thrust (N)
Operating temperature (°C)
Motor’s heat protection (°C)
Activation distance (mm)
Activation force (N)
Extra-stroke 250 N (mm)
Extra-stroke 400 N (mm)
Max. voltage (V)
missing translation**
missing translation**
missing translation**
missing translation**
Max. number of matchable card
Combinations
Radio signal frequency (Mhz)
Code digits
missing translation**
Maximum speed measured at the end of the leaf (m/min)
Battery capacity (mAh)
24 V (mA) relay rating
Max. absorption (mA)
Absorption while transmitting (mA)
Stand-by absorption (μA)
Max. rating of 24 V (A) relay contacts
Material
Max system voltage (V)
Short-circuit current (A)
Open circuit voltage (V)
Tolerance at max. power (%)
Temperature coefficient (%K)
Fuse (A)
Cell efficiency (%)
Protection rating (IP)
Torque (Nm)
Rpm speed (turns/min)
Linear travel (mm)
Weight lifted (Kg)
Limit switch revolutions (revolutions)
Duration of operation (min)
Opening time at 180° (s)
Reduction ratio (i)
Crown turns (rpm)
Motor’s heat protection (°C)
Length (mm)
Weight (Kg)
Package dimensions (mm)
Weight of packed motor (Kg)