/ / QBE Shutters and Lights / 842EC-0030
842EC-0030

842EC-0030

QBEDFMB3

QBE Shutters&Lights, Ethernet Gateway, with Matter protocol

Depliant
Manuals and Certifications
Gearmotor or automation with encoder.
Automation tested in compliance with European standards regarding impact forces.
24 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
36 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
48 V DC gearmotor suitable for intensive service. It guarantees operation even in the event of a blackout.
120 V AC gearmotor for US markets.
230 V AC gearmotor.
230-400 V AC three-phase gearmotor for industrial use. It guarantees greater inspiration in the starting phase.
Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.
Product designed to house the 806SS-0040 plug-in card from the RIO System 2.0 series.
Product compatible with CXN BUS 2-wire connection technology.
Product equipped with BRUSHLESS technology.
From the house to the condominium, the X1 system is able to satisfy any need regarding the number of internal extensions, the distances involved in the system and the management of the entrance panels.
From a single home to a large residential complex, the XIP system combines simplicity of installation and coverage of large distances. Both access control management and concierge services are integrated into the system.
The IP360 system uses Ethernet distribution as the main structure for communication, guaranteeing an almost infinite extension of the system. It overcomes all the limits of traditional video door entry systems, allowing maximum freedom of configuration.
The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, since it is sufficient to supply only the power supply.
The 200 system is characterized by great versatility: all the functions that can be implemented in the system are implemented by coding on the same two conductors that carry the audio signal. The System 200 also provides only direct current power, which guarantees immunity from disturbances and buzzes on the audio.

    Complete your solution

    Tubular motors
    809Y5-0010
    809Y5-0010

    230 V AC gearmotor for roller shutters with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque 10 Nm.

    809Y5-0020
    809Y5-0020

    230 V AC gearmotor for roller shutters with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque 20 Nm.

    809Y5-0030
    809Y5-0030

    230 V AC gearmotor for roller shutters with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque 30 Nm.

    809Y5-0040
    809Y5-0040

    230 V AC gearmotor for roller shutters with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque 40 Nm.

    809Y5-0050
    809Y5-0050

    230 V AC gearmotor for roller shutters with electronic limit switch, obstacle detection in both directions and built-in 869.50 MHz radio receiver. Max. torque 50 Nm.

    Wirelss modules
    67600470
    67600470

    The module features one relay output with potential-free NO contact, to control one electrical load, and one x 230 VAC digital input to connect control devices (buttons or switches). The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

    67600480
    67600480

    It features two, NO contact, free-from-potential, relay outputs, for controlling two single electric loads, such as, lights, or a double electric load, such as, a shutter motor, and two, 230V AC digital inputs for control devices, such as, buttons or switches. The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

    67600720
    67600720

    The module features one relay output with potential-free NO contact, to control one electrical load, and one x 230 VAC digital input to connect control devices (buttons or switches). The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

    67600730
    67600730

    It features a 3W to 300W one-channel dimmer for controlling lighting and one input for connecting control devices such as buttons. The container can be installed in a switchboard on a DIN rail.

    67600710
    67600710

    It features one 0 – 10 V analog input, one relay output with NO contact for powering on and off the corresponding connected electrical load, plus one input for connecting control devices, such as buttons. The container can be installed in a switchboard on a DIN rail or built into the bottom of the box.

    Related products

    TOP
    TOP

    Fixed-code or rolling-code transmitters

    SEL Digital
    SEL Digital

    Selectors and transponders for automation control

    PLX VIDEO
    PLX VIDEO

    Hands-free video receiver with 5″ display