230 V AC - 50 Hz
Mechanical limit switch
433.92 MHz radio receiver
| CODE |
|---|
| Torque (Nm) |
| Rpm speed (turns/min) |
| Linear travel (mm) |
| Hoisted weight (Kg)* |
| Limit switch revolutions (revolutions) |
| Duration of operation (min) |
| Protection rating (IP) |
| Power supply (V - 50/60 Hz) |
| Power supply to motor (V) |
| Absorption (A) |
| Power (W) |
| Opening time at 180° (s) |
| Reduction ratio (i) |
| Duty/cycle (%) |
| Crown turns (rpm) |
| Operating temperature (°C) |
| Motor’s heat protection (°C) |
| Length (mm) = L1 |
| Weight (Kg) |
| Package dimensions (mm) |
| Weight of packed motor (Kg) |
Octagonal 60 x 0.8 mm.
Octagonal 59 x 0.7 mm.
Octagonal 70 x 1.2 mm.
Octagonal 52 x 0.6 mm, eccentric 0,6 mm.
Set of 50/OCT. adapters 60. Bonfanti star print.
64 x 1 mm Z.F. round piece
Ring Z.F. 54 x 0.5 mm.
Ring 70 x 1.5 mm.
80 x 1 mm Z.F. Round piece.
Ring 58 x 0.8 mm.
Ring 50 x 1.5 mm SOPROFEN with S key.
Ring 71 x 1.5 mm, eccentric 2 mm.
Ring 101.9 x 3.5 mm.
Ring 57 x 1.5 mm
53 x 0.6 mm DEPRAT round piece
Reinforced tube 56 x 4.5 mm.
Head 78 x 1.2 mm.
Head 85 x 1.2 mm.
DEPRAT Head 62 x 0.6 mm.
89 x 1 mm DEPRAT Round piece
Head 78 x 1.5 mm, housing 13 x 13 mm.
63 mm tilted ogive.
70 mm tilted ogive.
80 mm tilted ogive.
Security insert Q10 MOM 5.
Multi-hole plate for: MOM 6 and MO6. Dimensions: 100 x 100 mm.
Plate with pin for: MOM 5 and MO6.
MO 5 chantier brace max 30 Nm.
Two-eyelet adjustable brace Q10 saddle.
Multi-perforated plate for sides with pin.
Quick latch MO 5 with plastic hole max. 20 Nm. Center distance 48/60 mm.
MO 5 quick plastic brace for the ZF side piece max 20 Nm.
Quick brace MO 5 with Q10 pin in plastic max. 30 Nm. Center distance 48/60 mm.
Omega with 48 mm center distance Q10 housing.
100 x 100 mm brace with Q10 saddle.
88 x 55 mm brace with Q10 saddle.
Omega with 60 mm center distance Q10 housing.
Iron brace for the MO 5.
OMEGA Q10 center distance 44-48 mm.
Adjustable brace with bushing for Q10.
Q10 pin especially made for the MATTA 5 tube motor.
Brace for traditional bracket.
Brace for KOMMERLING side piece.
Omega with D5 mm holes and 48 mm center distance Q10 housing.
70023 cross-shaped plate brace with screws.
M10 screw brace with size 10 star housing.
Q10 H4 mm Square-pin safety insert.
Snap-in awning-box blade for 150 mm sides.
Snap-in awning-box blade for 165 mm sides.
Snap-in awning-box blade for 180 mm sides.
Snap-in box blade for 205 mm sides.
Brace for Coffrelite box.
Brace for Edilcasse box.
Quick steel-brace with plate.
Quick brace with center distance q. 70.
ZF omega bracket for Q10 pin.
PVC extension 5 wires with quick connector. L = 7 m.
PVC extension 5 wires with quick connector. L = 10 m.
