/ / / 61400010
61400010

61400010

Plastic casing for installing on switchboards (EN50022) and size 12 low DIN modules. Control board for managing entry panels (18 V DC – 1100 mA max) and for managing the main intercom (20 V DC – 800 mA max) with electronic overload or short-circuit protection. With terminals for managing the main bus and terminals connecting the bus line for 3 intercom entry panels. Built-in intercom selector. Open collector outputs for auxiliary functions (AUX1 and AUX2). Manual or PC programming via MINI USB connector. Entry jumper for programming the access control devices. Use this power supply unit only with intercom systems. 230 V AC 50/60 Hz supply from the power grid. IP30 water and dust protection rating.

Manuals and Certifications
  • X1
Gearmotor or automation with encoder.
Automation tested to be compliant with European standards for impact forces.
24 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.
36 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.
48 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.
120V AC gear motor for US markets.
230 V AC gear motor.
230-400 V AC three-phase gear motor for industrial use. Guarantees greater starting torque.
Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.
This product is designed to fit the RIO System 2.0-series, 806SS-0040 snap-in card.
Product compatible with CXN BUS 2-wire connection technology.
Product equipped with BRUSHLESS technology.
From detached houses to apartment buildings, the X1 system can meet any requirement in terms of the number of internal branches, the distances involved in the system and the management of external stations.
From single dwellings to large residential complexes, the XIP system combines ease of installation with coverage over long distances. Both access control management and concierge services are integrated into the system.
The IP360 system uses Ethernet distribution as its main communication structure, ensuring an almost infinite extension of the system. It overcomes all the limitations of traditional video door entry systems, allowing maximum freedom of configuration.
The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, as only the power supply needs to be provided.
The 200 system is characterised by its great versatility: all the functions that can be implemented in the system are carried out by encoding on the same two conductors that carry the audio signal. The 200 system also only requires direct current power supply, which guarantees immunity from noise and humming on the audio.
Technical data

MODELS

A/01

Dimensions (DIN)

12 DIN EN50022 35 x 7,5

Dimensions (mm)

210 x 106 x 64,5

Power supply (V)

220-230 AC 50/60 Hz

Max. absorption (mA)

350

Power (W)

25

Operating temperature (°C)

0 ÷ +35

Nominal power supply external units (V)

18 DC

Current absorbed external units (mA)

600

Peak power supply external units (V)

18 DC

Peak current absorbed by external units (A)

1,1<15’’*

Upright power supply (V)

20 DC

      Related products

      TH/ONE
      TH/ONE

      Wi-Fi surface-mount programmable thermostat

      QBE Smart Home
      QBE Smart Home

      Wireless gateway designed to control up to 32 Home Automation devices

      QBE Shutters&Lights
      QBE Shutters&Lights

      Gateway for continuous control of shutters and lighting

      TOP
      TOP

      Fixed-code or rolling-code transmitters