Gates automation / Swing gate operators / FTX / 801MB-0130

801MB-0130

FTX20DGC

24 V irreversible gearmotor, fast version, complete with electronic board with function display, built-in radio decoder and articulated transmission arm for swing gates with C Max. 150 mm with leaf up to 2 m and 200 kg in weight. RAL7024 gray cover.

Manuals and Certifications

Chiave	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore
Max. length of leaf (m)	2	1,7	1,5	1
Max. weight of leaf (kg)	200	225	230	250

24 V
CAME Connect
Encoder
RIO System 2.0
EN Tested

Gearmotor or automation with encoder.

Automation tested to be compliant with European standards for impact forces.

24 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.

36 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.

48 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.

120V AC gear motor for US markets.

230 V AC gear motor.

230-400 V AC three-phase gear motor for industrial use. Guarantees greater starting torque.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

This product is designed to fit the RIO System 2.0-series, 806SS-0040 snap-in card.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From detached houses to apartment buildings, the X1 system can meet any requirement in terms of the number of internal branches, the distances involved in the system and the management of external stations.

From single dwellings to large residential complexes, the XIP system combines ease of installation with coverage over long distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as its main communication structure, ensuring an almost infinite extension of the system. It overcomes all the limitations of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, as only the power supply needs to be provided.

The 200 system is characterised by its great versatility: all the functions that can be implemented in the system are carried out by encoding on the same two conductors that carry the audio signal. The 200 system also only requires direct current power supply, which guarantees immunity from noise and humming on the audio.

8K01MB-023

Leaf up to 2 m and weight up to 200 kg

801MB-0130

Fast irreversible 24 V gearmotor with display for swing gates up to 2 m and 200 kg. RAL7024 gray cover

801MB-0140

Fast irreversible 24 V gearmotor with articulated arm for swing gates up to 2 m and 200 kg. RAL7024 gray cover

001AF43S

433,92 MHz plug-in radio frequency card.

806TS-0270

Four-channel 433.92 MHz rolling code transmitter

001DIR10

Pair of 12 – 24 V AC – DC outdoor photocells

806LA-0020

LED flashing light with power supply from 24 V AC – DC up to 230 V AC

806LA-0040

Wall-fastening base for KRX.

4228003000

Antenna cable L = 5 m.

Technical data

Dato tecnico	Valore
Power supply (V – 50/60 Hz)	230
Power supply to motor (V)	24
Absorption (A)	4 Max.
Power (W)	140
Maneuvering time at 90° (s)	13 ÷ 30
Cycles/Hour	40
Protection rating (IP)	44

Operational limits

Chiave	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore
Max. length of leaf (m)	2	1,7	1,5	1
Max. weight of leaf (kg)	200	225	230	250

Complete your solution

Slave gearmotor

801MB-0140

24 V irreversible gearmotor, fast version, with articulated transmission arm for swing gates with C Max. 150 mm with leaves up to 2 m and 200 kg in weight. RAL7024 gray cover.