Gates automation / Industrial door automation / F4000 / 001F4024E

001F4024E

Irreversible gearmotor with encoder.

Chiave	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore
Max. length of leaf (m)	1,5	1,2	–	–	–	–	–	–	–
Max. weight of leaf (kg)	200	150	–	–	–	–	–	–	–

24 V
Encoder
EN Tested

Gearmotor or automation with encoder.

Automation tested to be compliant with European standards for impact forces.

24 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.

36 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.

48 V DC gear motor suitable for intensive use. Guarantees operation even in the event of a power failure.

120V AC gear motor for US markets.

230 V AC gear motor.

230-400 V AC three-phase gear motor for industrial use. Guarantees greater starting torque.

Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.

This product is designed to fit the RIO System 2.0-series, 806SS-0040 snap-in card.

Product compatible with CXN BUS 2-wire connection technology.

Product equipped with BRUSHLESS technology.

From detached houses to apartment buildings, the X1 system can meet any requirement in terms of the number of internal branches, the distances involved in the system and the management of external stations.

From single dwellings to large residential complexes, the XIP system combines ease of installation with coverage over long distances. Both access control management and concierge services are integrated into the system.

The IP360 system uses Ethernet distribution as its main communication structure, ensuring an almost infinite extension of the system. It overcomes all the limitations of traditional video door entry systems, allowing maximum freedom of configuration.

The 4G system allows you to establish a connection with the called number thanks to the 4G network over unlimited distances. It is ideal in all applications where it is impossible to lay cables, allowing the installation of devices without any wiring, as only the power supply needs to be provided.

The 200 system is characterised by its great versatility: all the functions that can be implemented in the system are carried out by encoding on the same two conductors that carry the audio signal. The 200 system also only requires direct current power supply, which guarantees immunity from noise and humming on the audio.

Technical data

Dato tecnico	Valore
Power supply (V – 50/60 Hz)	230 AC
Power supply to motor (V)	24 DC
Absorption (A)	5 max
Power (W)	130
Duty/cycle (%)	HEAVY-DUTY SERVICE
Thrust (N)	360
Operating temperature (°C)	-20 ÷ +55
Protection rating (IP)	54
Torque (Nm)	360
Reduction ratio (i)	1/150
Crown turns (rpm)	1,3

Operational limits

Chiave	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore	Valore
Max. length of leaf (m)	1,5	1,2	–	–	–	–	–	–	–
Max. weight of leaf (kg)	200	150	–	–	–	–	–	–	–

Complete your solution

Control panels

801QA-0050

Multifunction control panel, with 230 V AC power supply, for 24 V double-leaf swing gates, with programming and signaling display, self-diagnosis of safety devices, Adaptive Speed & Torque Technology, CXN BUS, 2 safety inputs and storage of up to to 250 users.

24 V
CAME Connect
Encoder
RIO System 2.0
EN Tested
CXN BUS

801QA-0060

Multifunction control panel, with 230 V AC power supply, for 24 V double-leaf swing gates, with graphic programming and signaling display, self-diagnosis of safety devices, Adaptive Speed & Torque Technology, CXN BUS, 4 safety and storage inputs up to 1000 users.

24 V
CAME Connect
Encoder
RIO System 2.0
EN Tested
CXN BUS

Accessories

001F4004

Sliding drive-arm with track.

Electronic accessories

002RSE

Interface card for controlling two operators or for enabling the Came Remote Protocol.

001AF43S

433,92 MHz plug-in radio frequency card.

001AF868

868.35 MHz plug-in radio frequency card.

806SS-0040

Wireless, plug-in radio control module for wireless accessories.

RIO System 2.0

806XG-0080

BUS expansion module with 2 inputs and 2 outputs. Inputs can be configured in NO, NC or resistive mode (8K2), a warning light output and a relay output.

CXN BUS

806SA-0140

Gateway to connect the automation to the cloud via WiFi or locally via Bluetooth selector (50 users)

CAME Connect