GARD LS4

PERFORMANCE
MEETS
DESIGN

MCBF

1.500.000 CYCLES

INTENSIVE USE 300 CYCLES/HOUR

  • FOR PASSAGES UP TO 3,8 METRES
  • RELIABLE: motor with encoder and advanced speed control
  • FAST AND EFFICIENT: with opening speed 2-4 seconds
  • ADVANCED ELECTRONICS: CONNECT and MODBUS protocol
  • REFINED BOOM: with integrable RG LED lights and rubber profile
  • SAFE: EN12453 certification with efficient obstacle detection system

RELIABLE 24V MOTOR WITH ADVANCED SPEED CONTROL

This function ensures smooth movement and constant speed, without any oscillations that could lead to damages. The 24V motor can also work in case of power outage.

DISCOVER EMERGENCY BATTERY SYSTEM >

Reliable 24V motor with advanced speed control

EMERGENCY BATTERY SYSTEM

In the occurrence of a blackout or in any emergency situation where an electrical problem occurs, GARD LS4 is able to operate in complete safety thanks to an auxiliary battery power supply system.

Safety battery system

SINGLE-SPRING
BALANCING SYSTEM:

ONLY ONE SPRING (GREEN)
NEEDED FOR DIFFERENT
BOOMS LENGHTS

HIGH VISIBILITY RG LED LIGHTS
ACTING AS TRAFFIC LIGHT

It regulates access through fixed red,
flashing red or green signalling.

EMBEDDED WITH CONNECT
TECHNOLOGY

Logo Came Connect The barrier GARD LS4 can be managed remotely via PC or smartphone for automatic programming of transmitters, management of customers and system, status of devices and scheduled maintenance.

You can digitally set up and configure GARD LS4 on site using CAME KEY & Mobile phone with APP SetUp.

DISCOVER CAME KEY >

BREAKAWAY SECURITY SYSTEM

A solid steel device allows the boom to disengage in case of impact and to settle in a safe position, eliminating repair costs and long recovery times.

SHOCK ABSORBING RUBBER PROFILE

With an efficient and safe obstacle detection system.

Easy start-up boom can be installed right or lefthand.

Thanks to a dedicated intermediate plate, GARD LS4 allows installer to easily change the opening direction even after having installed the barrier, with no need for disassembling any component.

Start it up only three steps!

  1. Choose the opening direction
  2. Choose the boom length
  3. Run the first calibration

Thanks to the open Modbus protocol, GARD LS4 supports communication to and from multiple devices connected to the same network, as well as access control or parking systems.

DISCOVER MORE ABOUT CAME CONNECT >

KLT Flashing light KLT Flashing light KLT Flashing light

KLT
FLASHING LIGHT

The new KLT flashing light has been developed for adding safety signalling to GARD LS4.
Its slim shape perfectly matches the cabinet upper cover lines. Together with the RG LED strip system on the boom, KLT is the perfect solution for any context where it is necessary to regulate the access acting as traffic light. However it is possible to use it as a standard single color flashing light.

US | EN

CHOOSE YOUR COUNTRY

Where do you come from?