Gearmotor with mechanical limit-switches.
|Protection rating (IP)||54||54||54||54|
|Power supply (V - 50/60 Hz)||230 AC||230 AC||230 AC||230-400 V AC THREE PHASE|
|Power supply to motor (V)||230 AC 50/60 Hz||230 AC 50/60 Hz||24 DC||230-400 V AC TRIPH. 50/60Hz|
|Absorption (A)||2,2||3,6||9 Max.||2,5|
|Crown turns (rpm)||21,5||21,5||26,5||21,5|
|Duty/cycle (%)||30||30||HEAVY-DUTY SERVICE||50|
|Operating temperature (°C)||-20 ÷ +55||-20 ÷ +55||-20 ÷ +55||-20 ÷ +55|
|Motor’s heat protection (°C)||150||150||-||150|
Reset system for sliding doors with Z = 26 pinion shaft for gearmotor hollow shaft, chain-tightening reset, gearmotor-anchoring braces and lead-fastening braces.
Chain-drive system (upper door height at 5.5.m) with Z = 26 pinion shaft for gearmotor hollow shaft, Z = 40 pinion with chain and joint for 1/2” chain and gearmotor-anchoring braces.
Package of two drilled braces with Ø 25.4 mm (1”) spring shaft (this accessory is specific for fitting onto doors with direct transmission gearmotor).
Motor supporting brace with Ø 25.4 mm (1”) spring shaft (specific accessory for fitting onto doors with direct-drive gearmotors).
Double frequency and fixed code solution
Ideal solution for use in apartment buildings and industrial plants
Cordless infrared beam safety device
Total control at a glance