Wired detectors | CAME

Wired detectors

Passive infrared technology

  • low power absorption

  • inside applications

  • adjustable sensitivity for optimal coverage

  • 15 m  range and 141 ° opening

  • complete with joint

 

Dual technology

  • dual element passive infrared pyroelectric sensor (PIR), and planar microwave sensor (MW)

  • both detecting sections are adjustable

  • two functions:

  1. the alarm status is signalled when both sections have an alarm active

  2. the alarm status is signalled when one of the two sections is in alarm mode inside applications

  • low power absorption

  • 15 m  range and 141° opening

  • complete with joint

 

Passive infrared low absorption technology

  • inside applications

  • low power absorption

  • 10 m range and 110° opening

  • special circuit for temperature compensation

  • number of detections before alarm signaling can be adjusted

  • complete with joint

 

Low power absorption and passive infrared technology (pet immune)

  • inside applications

  • low power absorption

  • immune to pets weighing less than 20 Kg

  • 10 m range and 110° opening

  • special circuit for temperature compensation

  • number of detections before alarm signaling can be adjusted

  • complete with joint

Dual technology (PIR + MW) with low absorption

All detectors are equipped with dual technology (passive infrared + microwave planar) and a special circuit for temperature compensation. To avoid false alarms, you can adjust the sensitivity of the microwave and the number of detections after whcih the alarm is triggered.

001SDT315:

  • 15 m range and 110° opening

001SDT311PT:

  • immune to pets weighing less than 20 Kg

  • 11 m range and 110° opening

001SDT315AM:

  • anti-masking function

  • 15 m range and 110° opening

001SDT325:

  • suitable to cover large areas thanks to its 25 m range and 83 ° opening

 

Indoor ceiling application

  • passive infrared dual element pyroelectric sensor (PIR)

  • low power absorption

  • adjustable number of detections before the alarm is triggered

  • with a special circuit for temperature compensation for maximum efficiency even at high temperatures

Coverage:

  • installed at a height of 4m with a diameter on the ground of 13 m

  • installed at 6.8 m in height with a diameter on the ground of 17 m

Double technology detector

  • passive infrared (PIR) and microwave (MW) dual element pyroelectric sensor with patch antenna

  • low power absorption

  • can adjust the sensitivity of the microwave and the number of detections after which the alarm is triggered

Coverage:

  • installed at 2.8 m height with a diameter on the ground of 8 m

  • installed at 4.5 m height with a diameter on the ground of 13 m

 

Indoor ceiling or wall application

  • passive infrared dual element pyroelectric sensor (PIR)

  • curtain coverage effect

  • detects vibrations after which the alarm is triggered

  • fitted with a special temperature compensation circuit

  • 8 m range and 90° opening

 

Vibration detector

  • installed to protect doors and windows

  • detects vibrations resulting from impacts and attempts at breaking and entering

  • possibility of adjusting trip sensitivity