Are you a professional, an architect or a designer?

Here you can find a number of useful tools for your profession. Registration is easy: fill out the form with your details and you'll gain access to unique content!

Not a member yet?
Register now!
Login
Insert your login credentials

Operators

Inputs, typically connected to standard buttons of the various residential series, allow you to send control signals over the hei automation system BUS. The single entry is identified by the address assigned to the module and to its sequential number (eg module 3, input 2).

 

Input modules

  • 4 digital input module x 24 V DC

  • 8 digital input module x 24 V DC

  • 8 opto-isolated digital input module x 24 V DC

Types:

  1. digital input modules for installation from the bottom of the unit. They are easily installed in flush-mounting boxes of residential series

  2. opto-isolated digital input modules for DIN rail installation. They are installed into the normal electrical casings. Totally isolated from the rest of the system to guarantee high noise immunity

Programming

  • single command. Activation of a single output identified by a given address (eg Module 5 Output 2)

  • zone commandsignal sent to all the outputs of the same logic zone

  • remote control. The module sends the status of the BUS. The system processes the status of the various inputs according to programmable logics

  • multiple command. Up to 8 different commands to 8 different outputs

 

Output Modules

  • module w/ 2x 16 A relay outputs

  • module w/ 2x 16 A relay outputs with memory

  • module w/ 8x 6 A relay outputs

  • module w/ 8x 16 A relay outputs

All modules are equipped with NO contact for controlling electrical loads max 230 V AC.

Functionality:

  • installation inside standard electrical casings

  • on-board relay to control power loads

  • serial number identification

  • each output is equipped with local pushbutton control (in case of emergency)

  • status memory

  • bistable relay (only for modules with memory)

Programming

  • monostable: maintained action's switch (e.g. acoustic signal and bells command)

  • step by step: the output changes state each time the button is pressed (e.g., control of lighting points)

  • venetian blinds: command for Venetian blinds. needs two outputs of the module: rising, lowering and slat rotation

  • timed: the output is activated by a push button for a programmable amount of time

 

Bottom unit Input and output modules

The input/output modules group inputs for button connection and outputs for electrical load control in the same unit

  • module x 4 digital inputs, 4 OC transistor outputs, 24 V DC

  • module x 8 inputs and outputs 8 terminal individually programmable as digital input or OC 24 V DC transistor output

Functionality:

  1. installation in flush-mounting boxes of the residential series or junction boxes

  2. inputs connected to the standard buttons of various civil series

  3. "Open Collector" outputs command a signalling LED or a relay connected to the electrical loads

 

DIN rail I/O modules

  • module x 4 optoinsulated inputs + 4 x 16 A relay outputs

  • module x 4 optoinsulated inputs + 4 x 16 A relay outputs with memory

Functionality:

  1. programming for transmission over BUS of a single command, zone command, remote command

  2. multiple command (function available for only one module input)

  3. inputs for connection of contacts or long range digital signals

  4. output with NO contact to 230 V AC max.  control electrical loads

  5. installation in electrical casings

  6. status memory

  7. bistable relay (only for modules with memory)

 

Fulush-mounting I/O modules

  • module w/ 4 digital inputs and 4x6A relay outputs

  • module w/ 4 digital inputs and 3x6A relay outputs

  • module w/ 4 digital inputs and 2x6A relay outputs

Functionality:

  1. relay output with NO contact to 230 V AC max.  control electrical loads

  2. programming for transmission over BUS of a single command, zone command, remote command

  3. multiple command (function available for only one module input)

  4. installation in wiring junction boxes

  5. can be housed inside shutter boxes

  6. maximum connection distance between button and module input terminals is 5 m.

 

Automation control modules

The module 001DIFBSA allows control of 8 Came product (such as Sipario automatic doors Fast40 swign gate operator) connected on the RS485 bus automation.

  • ON / OFF type control via programmed digital inputs

  • advanced control via touch screen

  • integration of automation in special control scenarios

The operations available via touch screen are as follows:

  • opening and closing

  • status viewing (open closed) of the operators 

  • setting the parameters of automatic door operation (e.g. opening and closing speed, manual/automatic, exit only entrance only)

  • specification of the operating parameters of the gate (e.g. closing time, manual/automatic closing)

  • performing of control tests

 

Line isolator modules

  • allows you to isolate sections of the bus line to perform maintenance

  • enables communication between two powered sections of the system

  • isolates the section involved with one of the following faults, ensuring proper operation of the rest of the system:

  1. lack of power supply (24VDC)

  2. short circuit of the power line

  3. bus line disconnected

  4. bus line in short-circuit

 

Analogue input modules

Module w/ 2 x 0 - 10 V DC analogue inputs.

  • can be installed in junction or recessed boxes

  • measures analogue signals from sensors with  0 - 10 V DC analogue output for measuring humidity, brightness, etc..

  • can be programmed according to the following main methods:

  1. query only The value of the input is sent as a result of a request from PC or a touch screen connected to the BUS system

  2. automatic status transmission. The value of the input is sent as a result of exceeding set thresholds

  3. automatic activation. When exceeding set thresholds, allows the activation of digital or analogue output modules

 

Analogue output modules

Module w/ 3 x 0 - 10 V DC analogue outputs.

  • installation inside electrical casings

  • controls the dimmer for incandescent lamps, ballasts for fluorescent lamps and electronic regulators with input voltage of 0-10 V DC